DPA Microphones ST2011C Stereo Pair with 2011C Compact Cardioids

DPA Microphones ST2011C Stereo Pair with 2011C Compact Cardioids

Name: DPA Microphones ST2011C Stereo Pair with 2011C Compact Cardioids
Brand: DPA Microphones
SKU: J14601

Q&A|Item #:1392739378000 POS #:110143260

6-month special financing^ + $102 back in Rewards** Limited time Learn More

Lease-To-Own Purchase OptionsLearn more

Special order: Place an order for this item today and we’ll get it to you soon.

Notify me when this item is in stock.

Protect your gearLearn more

Cover drops, spills or cracks with Pro Coverage

Save on orders $199+ and get expert advice from a Gear Adviser

Gear SpecialistBundlingMusician

855-697-0864

Need Help?

See All DPA Microphones Live Microphone Packages

Description

The DPA ST2011C features two carefully matched 2011C cardioid microphones, a sturdy PeliTM case, mic holders, grids and windscreens. This Stereo Pair of handpicked cardioid microphones are selected on sensitivity within ±1.5 dB, which makes stereo principles such as XY and ORTF easy to orchestrate. The compact design and controlled directionality of the 2011C make this perfect pair an excellent choice for spot mics for classical recording and on-stage close mics for live sound. The foam design in the heavy-duty Peli transportation box allows for fast and easy exchange of microphone/accessory inlays. Peli Case for quality transportation and protection.

Features

Audio

Frequency response: 20Hz to 20kHz
Max SPL: 146 dB

Pattern and type

Capsule: Condenser
Pattern: Cardioid
Type: Mounted
Applications: Studio, stage, theatrical
Phantom power required: Yes

Size and weight

Length: 3.6
Weight: 2.3 oz.

Included accessories

Case: Hard case
Clip: Hard rubber
Power supply: No

Specs

Directional pattern: Cardioid
Principle of operation: Pressure gradient, with interference tube
Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
Frequency range: 20 Hz - 20 kHz
Frequency range, ± 2 dB, at 30 cm: 50 Hz - 17 kHz with 3 dB soft boost at 12 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 Pa (max. 23 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)
Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak
Dynamic range: Typ. 117 dB
Max. SPL, peak before clipping: 146 dB
Minimum load impedance: 2 kohm
Output impedance: < 200 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 50 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Color: Matte black
Weight: 64 g (2.3 oz)
Microphone diameter: 19 mm (0.75 in)
Microphone length: 92 mm (3.6 in)
Output voltage, RMS: > 4 V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40 C to 45 C (-40 F to 113 F)
Relative Humidity (RH): Up to 90%
Sensitivity selection tolerance (at 1 kHz): ± 1.5 dB